Junta giratoria neumática

Introducción del producto

La última innovación de reehonde, la Junta giratoria neumática, es una solución de ingeniería de precisión diseñada para cumplir con los exigentes requisitos de varias aplicaciones industriales. Este producto multifuncional combina conexiones neumáticas y eléctricas en una unidad compacta que garantiza una rotación perfecta, manteniendo al mismo tiempo un fuerte rendimiento.

Las juntas giratorias neumáticas están especialmente adaptadas a entornos que requieren la transmisión continua de fluidos y señales eléctricas a través de interfaces giratorias. Su diseño avanzado integra materiales de alta calidad y tecnología de fabricación de precisión, convirtiéndolo en una opción ideal para sistemas que requieren un funcionamiento confiable y eficiente.

Parámetros del producto

Product Features

Durable Construction

Shell Material: Constructed from lightweight yet durable Aleación de aluminio, the Pneumatic Rotary Union offers excellent corrosion resistance and mechanical strength.

Contact Material: Tabla de selección de nivel de producto de referencia for specific contact materials tailored to suit your application's needs, ensuring optimal electrical conductivity and wear resistance.

Versatile Performance

Rated Voltage: Supports a wide range of voltages from 0 to 440VAC/DC, making it compatible with various electrical systems.

Rated Speed: Tabla de selección de nivel de producto de referencia for speed ratings tailored to your specific requirements, ensuring smooth and reliable operation at high speeds.

Robust Insulation

Insulation Resistance: Less than 500MΩ at 300VDC, ensuring high electrical isolation and safety.

Insulation Strength: 500VAC at 50Hz for 6 seconds, providing additional safety margin against electrical breakdown.

Wide Operating Range

Working Temperature: Rated for temperatures ranging from -30°C to 80°C, allowing for use in a variety of environmental conditions.

Working Humidity: Suitable for operating humidity levels up to 85%RH, ensuring performance in humid environments.

High-Quality Wiring

Wire Specification: AWG17#/AWG22# Silver-coated Teflon wires, offering excellent electrical conductivity and resistance to heat and chemicals.

Wire Length: Standard length of 250mm, customizable to fit your specific application needs.

Smooth Rotation

Rotation Torque: Low torque of 0.05N.m + 0.02N.m/6 rotations, ensuring minimal friction and wear during operation.

Dynamic Resistance Change Value: Less than 0.010, maintaining consistent electrical performance throughout the rotation.

Pneumatic Connectivity

Flow Passage: Designed with multiple flow passages to accommodate pneumatic requirements, ensuring smooth and uninterrupted fluid transfer.

Protection Level

Protection Level: IP51 rated, providing a degree of protection against solid objects and dripping water, ensuring reliability in harsh environments.

Application Areas

The Pneumatic Rotary Union is versatile and can be utilized in a wide range of industrial applications, including but not limited to:

Automation Systems: Ideal for robotic arms and automated machinery where both electrical signals and pneumatic power need to be transmitted through rotating joints.

CNC Machines: Provides seamless integration for tools and sensors that require continuous electrical and pneumatic connections during machining operations.

Medical Equipment: Suitable for medical robots and patient-handling systems requiring precise and reliable pneumatic and electrical connections.

Aerospace and Defense: Utilized in gimbal systems, radar antennas, and other rotating components where high reliability and performance are critical.

Packaging Machinery: Ensures smooth operation of conveyors, indexing systems, and other packaging equipment that rely on both electrical and pneumatic control.

Installation Method

Installing the Pneumatic Rotary Union is a straightforward process that requires attention to detail to ensure optimal performance. Follow these steps for a successful installation:

Preparation:

Ensure all necessary tools and materials are available, including screws, seals, and mounting hardware.

Clean the installation area to remove any dirt, debris, or contaminants that could affect performance.

Mounting:

Position the Pneumatic Rotary Union on the desired mounting surface, aligning it with the rotating shaft and fluid/electrical connections.

Secure the union using the provided mounting hardware, ensuring it is tightly fastened to prevent leakage or movement during operation.

Wiring:

Connect the electrical wires to the corresponding terminals on the Pneumatic Rotary Union, following the wiring diagram provided.

Use wire connectors or soldering to ensure secure and reliable connections.

Apply heatshrink or electrical tape to protect the connections and prevent short circuits.

Pneumatic Connections:

Attach the pneumatic tubing to the flow passages on the Pneumatic Rotary Union, using appropriate fittings and seals to prevent leaks.

Ensure that all connections are tight and secure, and test the pneumatic system for leaks before operating.

Testing:

Before full-scale operation, perform a functional test to verify that the Pneumatic Rotary Union is working correctly.

Check for any leaks, electrical shorts, or unusual noise that may indicate a problem.

Adjust and fine-tune as necessary to ensure optimal performance.

FAQ

Q: What is the maximum operating pressure for the Pneumatic Rotary Union?

A: The maximum operating pressure depends on the specific model and configuration of the Pneumatic Rotary Union. Please refer to the product grade selection table or consult our technical support team for detailed information.

Q: Can the Pneumatic Rotary Union be customized to fit my specific application?

A: Absolutely! At Reehonde, we offer customized solutions to meet the unique needs of our customers. Our team of engineers can work with you to design a Pneumatic Rotary Union tailored to your specific application requirements.

Q: How do I maintain the Pneumatic Rotary Union to ensure long-term performance?

A: Regular maintenance is key to ensuring the long-term performance of the Pneumatic Rotary Union. Inspect the unit regularly for signs of wear, corrosion, or damage. Clean and lubricate the rotating components as needed, and replace worn-out parts promptly. Additionally, keep the Pneumatic Rotary Union protected from extreme temperatures, moisture, and contaminants to extend its lifespan.

Q: Is the Pneumatic Rotary Union compatible with all types of fluids?

A: The Pneumatic Rotary Union is designed to be compatible with a wide range of fluids, including air, water, oils, and other non-corrosive liquids. However, it is important to consult the product specifications and material compatibility chart to ensure that the Pneumatic Rotary Union is suitable for your specific fluid application.

Q: Can I install the Pneumatic Rotary Union in any orientation?

A: The Pneumatic Rotary Union can be installed in various orientations, depending on the specific model and application requirements. However, it is important to follow the installation instructions and guidelines provided to ensure proper alignment and function. Contact our technical support team if you have any questions about the appropriate installation orientation for your application.

Q: What is the warranty period for the Pneumatic Rotary Union?

A: Reehonde offers a comprehensive warranty for our Pneumatic Rotary Union, covering defects in materials and workmanship. The specific warranty period depends on the product model and purchase date. Please refer to the warranty statement provided with your product or contact our customer service team for more information.